« March 2006 | Main | June 2006 »
May 30, 2006
Fuel bracket and hoses
The first RVS connector piece between the hoses, looks great!
I made a alu bracket to hold the fuel pump. I'll hope the alu is strong enough for this job.
As you can see the actuator and the actuator will need some work. On the righ hand side you see Thomas' refactored bracket.
Posted by Marnix Renne at 09:47 PM
May 31, 2006
All kinds of stuff
Trial fitted the AMAL valve. Now I have to figure out where to connect these 3 pipes to ;)
I wish I had fitted the fuel lines before I had put in the rear bulk-head and rear-suspension, there is so little space now, you can hardly drill a hole. Nevertheless, the fuel return line is almost finished now...
... but I think I have a problem here. There is too less space between the fuel tank and the De Dion axle to bend the fuel hose. As you can see, DAX welded the connector at a different location at the fuel tank but moved it to the right for whatever reason. I wish they left it there.
Posted by Marnix Renne at 06:49 PM